SABATONA ULTRA-GLIDE READY TO WIN CONTROLLERS
ULTRA-GLIDE HO PRO CONTROLLER
New Ultra-Glide TM Contact Arm Technology
The New Sabatona “Ultra-Glide” Contact arm gives any standard resistor controller a “wiperless” feel that up to this point has only been available with potentiometer based electronic controllers.
Utilizing a combination of a modified “Fleming” hinge and our special conductive roller assembly, the Sabatona Ultra-Glide wiper system is the ultimate upgrade for any resistor controller, and gives a feel and response not found with any other known system.
Since our Ultra-Glide system is virtually frictionless, a special reduced tension trigger spring is also used for unmatched throttle response, and a lightning fast trigger return.
Complete “Ready to Race” Ultra-Glide HO Pro Controller Price $249.99
Order Stock number: SABC100
Available Sensitivity Ranges:
120-80 Ohm Featuring BRP 120 Ohm Progressive Resistor: Ideal for MAHOR/Stock through Fray Class T Jets on most tracks
100-60 Ohm Featuring BRP 100 Ohm Straight Resistor: A good choice for Fray style T Jets up to G Jets on a tight track
60-35 Ohm Featuring Parma 60 Ohm Resistor: A good choice for G Jets through most box stock Magnet Cars on tight tracks
45-25 Ohm Featuring Parma 45 Ohm Resistor: Ideal for G Jet and most Magnet cars up to Super Stock on most tracks
Our complete ready to race controllers are custom built with the goal to be the finest quality resistor based controller available.
All our controllers are Parma Turbo based, and offer the following features and upgrades as standard equipment:
Exclusive Ultra-Glide Contact Upgrade:Provides the smoothest feel of any resistor controller with a lightning fast return
Custom Contoured Trigger: Contoured for a smooth feel on your finger for a more connected "feel"
Ball Bearing Trigger Pivot: Improves trigger smoothness over bushings, will never wear out or develop slop
Custom Trigger Spring: Specially selected to match the Ultra-Glide assembly, this trigger spring is lighter than most standard springs. This lite spring allows improved throttle response precision throughout the range, but still provides a lightning fast trigger return. Heavier spring rates avaliable, but not reccomended on request.
Custom Painted Handle: A custom controller deserves a custom look! Complete with custom Sabatona Controller Graphics
Custom epoxied and trued resistor: Our resistors are epoxied for years of corrosion free use, and flattened for perfect contact
Adjustable Sensitivity: Adjustable resistor sensitivity through the top knob to help you fine tune trigger response to match your car's needs
Adjustable Brakes: Adjustable via the front knob for full brake through 0 brakes to match you car or track needs.
Custom Aluminum Knobs: A final touch for that ultra trick custom look. Will not crack like standard plastic knobs.
Silicone lead wires: For the ultimate "wireless" feel, and will last the life of the controller
Internal fuse protection:No more worries about improper track wiring/fusing. Protects resistor from wrong hookup or shorts. Spare fuse included
Diagnostic LED light: Indicates track power is on/off. No more wondering if the lane fuse is blown. Also doubles as a continuity check when brake wire is not in use/disconnected.
Leather “Hanger” Loop: When used, prevents the controller from being dropped on the floor. Just slip over one of the track terminal screws
Care and maintanance instructions: Complete with basic care and maintanance of the Ultra-Glide Contact arm, and troubleshooting
Each controller is both bench and track tested for optimum feel and function prior to shipping/delivery. These are hand crafted, hand assembled and tuned controllers, designed for experienced racers.
Please visit our Ordering page for ordering information. Please specify desired sensitivity range when ordering
ET Grip option: Add $7.50 installed
Please Allow 2-4 Weeks for shipment from time of deposite.
The New Sabatona “Ultra-Glide” Contact arm gives any standard resistor controller a “wiperless” feel that up to this point has only been available with potentiometer based electronic controllers.
Utilizing a combination of a modified “Fleming” hinge and our special conductive roller assembly, the Sabatona Ultra-Glide wiper system is the ultimate upgrade for any resistor controller, and gives a feel and response not found with any other known system.
Since our Ultra-Glide system is virtually frictionless, a special reduced tension trigger spring is also used for unmatched throttle response, and a lightning fast trigger return.
Complete “Ready to Race” Ultra-Glide HO Pro Controller Price $249.99
Order Stock number: SABC100
Available Sensitivity Ranges:
120-80 Ohm Featuring BRP 120 Ohm Progressive Resistor: Ideal for MAHOR/Stock through Fray Class T Jets on most tracks
100-60 Ohm Featuring BRP 100 Ohm Straight Resistor: A good choice for Fray style T Jets up to G Jets on a tight track
60-35 Ohm Featuring Parma 60 Ohm Resistor: A good choice for G Jets through most box stock Magnet Cars on tight tracks
45-25 Ohm Featuring Parma 45 Ohm Resistor: Ideal for G Jet and most Magnet cars up to Super Stock on most tracks
Our complete ready to race controllers are custom built with the goal to be the finest quality resistor based controller available.
All our controllers are Parma Turbo based, and offer the following features and upgrades as standard equipment:
Exclusive Ultra-Glide Contact Upgrade:Provides the smoothest feel of any resistor controller with a lightning fast return
Custom Contoured Trigger: Contoured for a smooth feel on your finger for a more connected "feel"
Ball Bearing Trigger Pivot: Improves trigger smoothness over bushings, will never wear out or develop slop
Custom Trigger Spring: Specially selected to match the Ultra-Glide assembly, this trigger spring is lighter than most standard springs. This lite spring allows improved throttle response precision throughout the range, but still provides a lightning fast trigger return. Heavier spring rates avaliable, but not reccomended on request.
Custom Painted Handle: A custom controller deserves a custom look! Complete with custom Sabatona Controller Graphics
Custom epoxied and trued resistor: Our resistors are epoxied for years of corrosion free use, and flattened for perfect contact
Adjustable Sensitivity: Adjustable resistor sensitivity through the top knob to help you fine tune trigger response to match your car's needs
Adjustable Brakes: Adjustable via the front knob for full brake through 0 brakes to match you car or track needs.
Custom Aluminum Knobs: A final touch for that ultra trick custom look. Will not crack like standard plastic knobs.
Silicone lead wires: For the ultimate "wireless" feel, and will last the life of the controller
Internal fuse protection:No more worries about improper track wiring/fusing. Protects resistor from wrong hookup or shorts. Spare fuse included
Diagnostic LED light: Indicates track power is on/off. No more wondering if the lane fuse is blown. Also doubles as a continuity check when brake wire is not in use/disconnected.
Leather “Hanger” Loop: When used, prevents the controller from being dropped on the floor. Just slip over one of the track terminal screws
Care and maintanance instructions: Complete with basic care and maintanance of the Ultra-Glide Contact arm, and troubleshooting
Each controller is both bench and track tested for optimum feel and function prior to shipping/delivery. These are hand crafted, hand assembled and tuned controllers, designed for experienced racers.
Please visit our Ordering page for ordering information. Please specify desired sensitivity range when ordering
ET Grip option: Add $7.50 installed
Please Allow 2-4 Weeks for shipment from time of deposite.
ULTRA-GLIDE HO "Classic" CONTROLLER
The Sabatona Ultra-Glide HO "Classic" controller is as a "Straight 100 Ohm" controller with no adjustable sensitivity or brake pots, The Classic is designed for the "Old School" T Jet racer that prefers to tune the car and not the controller, but wants that "Feel" only a Sabatona Ultra-Glide controller can offer.
The standard "Classic" is a 3 wire system with Brakes. If you would prefer a 2 wire setup, please specify "Brake Delete" at time of order.
Complete RTR Ultra-Glide HO "Classic" Controller Price $224.99
Order Stock number: SABC101
The Classic is assembled using an epoxied and trued BRP "Straight 100" resistor, and is equipped with the following additional features:
Exclusive Ultra-Glide Contact Upgrade:Provides the smoothest feel of any resistor controller with a lightning fast return
Custom Contoured Trigger: Contoured for a smooth feel on your finger for a more connected "feel"
Ball Bearing Trigger Pivot: Improves trigger smoothness over bushings, will never wear out or develop slop
Custom Trigger Spring: Specially selected to match the Ultra-Glide assembly, this trigger spring is lighter than most standard springs. This lite spring allows improved throttle response precision throughout the range, but still provides a lightning fast trigger return. Heavier spring rates avaliable, but not reccomended on request.
Custom Painted Handle: A custom controller deserves a custom look! Complete with custom Sabatona Controller Graphics
Custom epoxied and trued resistor: Our resistors are epoxied for years of corrosion free use, and flattened for perfect contact
Silicone lead wires: For the ultimate "wireless" feel, and will last the life of the controller
Internal fuse protection:No more worries about improper track wiring/fusing. Protects resistor from wrong hookup or shorts. Spare fuse included
Wired for Brakes: The Classic comes standard with a 3rd wire Brake pre-installed, but can be special ordered with the "Brake Delete" option. Please specify "Brake Delete" at time of order.
Diagnostic LED light: Indicates track power is on/off. No more wondering if the lane fuse is blown. Also doubles as a continuity check when brake wire is not in use/disconnected.
Leather “Hanger” Loop: When used, prevents the controller from being dropped on the floor. Just slip over one of the track terminal screws
Care and maintanance instructions: Complete with basic care and maintanance of the Ultra-Glide Contact arm, and troubleshooting
Each controller is both bench and track tested for optimum feel and function prior to shipping/delivery. These are hand crafted, hand assembled and tuned controllers, designed for experienced racers.
Please visit our Ordering page for ordering information.
ET Grip option: Add $7.50 installed
Please Allow 2-4 Weeks for shipment from time of deposite.
The standard "Classic" is a 3 wire system with Brakes. If you would prefer a 2 wire setup, please specify "Brake Delete" at time of order.
Complete RTR Ultra-Glide HO "Classic" Controller Price $224.99
Order Stock number: SABC101
The Classic is assembled using an epoxied and trued BRP "Straight 100" resistor, and is equipped with the following additional features:
Exclusive Ultra-Glide Contact Upgrade:Provides the smoothest feel of any resistor controller with a lightning fast return
Custom Contoured Trigger: Contoured for a smooth feel on your finger for a more connected "feel"
Ball Bearing Trigger Pivot: Improves trigger smoothness over bushings, will never wear out or develop slop
Custom Trigger Spring: Specially selected to match the Ultra-Glide assembly, this trigger spring is lighter than most standard springs. This lite spring allows improved throttle response precision throughout the range, but still provides a lightning fast trigger return. Heavier spring rates avaliable, but not reccomended on request.
Custom Painted Handle: A custom controller deserves a custom look! Complete with custom Sabatona Controller Graphics
Custom epoxied and trued resistor: Our resistors are epoxied for years of corrosion free use, and flattened for perfect contact
Silicone lead wires: For the ultimate "wireless" feel, and will last the life of the controller
Internal fuse protection:No more worries about improper track wiring/fusing. Protects resistor from wrong hookup or shorts. Spare fuse included
Wired for Brakes: The Classic comes standard with a 3rd wire Brake pre-installed, but can be special ordered with the "Brake Delete" option. Please specify "Brake Delete" at time of order.
Diagnostic LED light: Indicates track power is on/off. No more wondering if the lane fuse is blown. Also doubles as a continuity check when brake wire is not in use/disconnected.
Leather “Hanger” Loop: When used, prevents the controller from being dropped on the floor. Just slip over one of the track terminal screws
Care and maintanance instructions: Complete with basic care and maintanance of the Ultra-Glide Contact arm, and troubleshooting
Each controller is both bench and track tested for optimum feel and function prior to shipping/delivery. These are hand crafted, hand assembled and tuned controllers, designed for experienced racers.
Please visit our Ordering page for ordering information.
ET Grip option: Add $7.50 installed
Please Allow 2-4 Weeks for shipment from time of deposite.
